Item number PORT-UNMAN-ETHER-SWITC-17

9-Port Unmanaged Ethernet Switch, 8x RJ45, 1x 100Base-FX ST Fiber

8 x RJ-45 10/100 Base-TX ports
1 x 100 Base-FX fiber, ST connector
Multi-mode fiber, up to 2km
Store and forward wire speed switching
IEEE 802.3, 802.3u, 802.3x
MAC table 2048, 512Kbit buffer
Redundant power inputs
Relay alarm output 1A @ 30VDC
Metal casing, IP20
DIN-rail or wall mounting
12-48VDC
73 x 132 x 105 mm
-10C to +75C (special components required)

383.24 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-rail mounting or wall mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 10 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, PWR_OK, Link/Act, 10/100M, Full duplex/Half duplex (Fiber Port)
Ports 8 x RJ-45, 10/100 Base-TX1 x 100 Base-FX, ST connector
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.26 A @ 24 VDC
Dimensions (mm) 73 x 132 x 105 (W x L x H)
Storage Temperature 20 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP20
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Table 2048
Memory Bandwidth 2.0 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 1 A @ 30 VDC
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output 20 dBm Min.-14 dBm Max.

Unmanaged Ethernet Switch

This unmanaged Ethernet switch is designed for industrial networks that require reliable data transmission over both copper and fiber. The switch connects local devices via RJ-45 ports while supporting long distances through a dedicated fiber port. It is well suited for demanding environments requiring stable operation and rugged construction.


8 x RJ-45 ports · 1 x 100 Base-FX fiber · 12-48VDC redundant · Metal casing IP20


Features that ensure stable operation

  • Redundant power input - ensures continuous operation if one input fails
  • Long-range fiber port - connects equipment up to 2 km away
  • Store and forward switching - reduces data transmission errors
  • Alarm relay - notifies on power or link failure
  • Rugged metal casing - withstands industrial environments


Applications in industrial networks

The switch fits production facilities and infrastructure projects where copper and fiber connections need to be combined reliably.

  • Factory automation
  • Building installations
  • Monitoring systems
  • Distributed measurement equipment


A rugged and reliable switch for industrial networks that combines copper and fiber in one system.