Item number PORT-UNMAN-ETHER-SWITC-16

8-Port Unmanaged Ethernet Switch with 100Base-FX Fiber SC Port

8 x RJ-45 10/100 Base-TX ports
1 x 100 Base-FX SC fiber port
Multi-mode fiber, up to 2km
Wavelength 1300/1310nm
Store and forward switching
MAC table 2048, 2.0 Gbps bandwidth
Redundant power input
Alarm relay output 1A 30VDC
Metal casing, IP20
DIN-rail or wall mounting
12-48VDC
10C to 75C (special components required)
73 x 132 x 105 mm

383.24 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-rail mounting or wall mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 10 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, PWR_OK, Link/Act, 10/100M, Full duplex/Half duplex (Fiber Port)
Ports 1 x 100 Base-FX, SC connector8 x RJ-45, 10/100 Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.26 A @ 24 VDC
Dimensions (mm) 73 x 132 x 105 (W x L x H)
Storage Temperature 20 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP20
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Table 2048
Memory Bandwidth 2.0 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 1 A @ 30 VDC
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output 20 dBm Min.-14 dBm Max.

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require reliable data transfer and extended reach. It combines 10/100 Base-TX ports with a fiber port for longer distances and electrical isolation, making it suitable for demanding environments where uptime is critical.


8 x RJ-45 10/100Base-TX · 1 x 100Base-FX SC fiber · Redundant 12-48VDC · -10C to 75C


Features that ensure stable operation

  • Fiber port -provides up to 2km reach and galvanic isolation
  • Redundant power input -ensures continuous operation on failure
  • Alarm relay -signals power loss or fault conditions
  • Metal housing with IP20 -protects electronics in industrial settings
  • Wide operating temperature -enables use in harsh environments


Application areas

The switch fits industrial networks where fiber is needed for distance or noise immunity.

  • Factory automation
  • Transportation and traffic control systems
  • Building automation
  • Surveillance and security systems


A robust and reliable solution for industrial networks requiring fiber connectivity and redundant power.