Item number PORT-UNMAN-ETHER-SWITC-10

6-Port Unmanaged Ethernet Switch, 4x RJ45 + 2x 100Base-FX SC Single-Mode, 30km

4 x 10/100Base-TX RJ45 ports
2 x 100Base-FX SC, Single-Mode
Fiber distance up to 30 km
Store and forward switching
MAC table 2048, buffer 1 Mbit
IEEE 802.3x flow control
Redundant power input
Relay alarm output 2A 30VDC
Metal casing, DIN-Rail, IP30
12-48VDC redundant input
-30C to +75C (special components required)
25 x 168 x 131 mm

434.16 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 2 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.14 A @ 24 VDC
Dimensions (mm) 25 x 168 x 131 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require combining copper and fiber connections. It delivers stable data transmission over long distances via single-mode fiber and is well suited for demanding operating environments.


4 x RJ-45 · 2 x 100Base-FX SC · Up to 30 km · Redundant 12-48VDC


Features that ensure reliable operation

  • Store and forward - ensures accurate data forwarding without errors
  • Redundant power input - keeps the network running if one supply fails
  • Relay alarm output - notifies operators of fault conditions
  • Metal casing with IP30 - protects against dust and mechanical impact
  • Wide operating temperature range - reliable in harsh environments


Applications in industrial networks

The switch fits installations where long distances and electromagnetic noise place demands on the network equipment.

  • Manufacturing plants
  • Traffic and infrastructure systems
  • Surveillance systems
  • Remote industrial sites


A rugged and reliable solution for industrial networks that need fiber connectivity over long distances.