Item number PORT-UNMAN-FIBER-SWITC

6-Port Unmanaged Fiber Switch, 4x RJ45, 2x SC Single-Mode 60km

4 x 10/100Base-TX RJ-45 ports
2 x 100Base-FX SC ports, Single-Mode
Fiber distance up to 60 km
Store and forward, MAC table 2048
IEEE 802.3x flow control
Redundant power input, reverse polarity protection
Relay alarm output 2A @ 30VDC
Metal casing, DIN-Rail mounting
IP30, ESD protection 4kV
12-48VDC
25 x 168 x 131 mm
-30C to +75C (special components required)

548.06 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 4 x RJ-45, 10/100Base-TX2 x 100 Base-FX, SC connector
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.14 A @ 24 VDC
Dimensions (mm) 25 x 168 x 131 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 35 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is built for industrial networks where long transmission distances and high reliability are essential. It combines standard Ethernet ports with single-mode fiber ports, allowing data to travel long distances without signal loss.


4 x RJ-45 10/100Base-TX · 2 x SC Single-Mode up to 60 km · 12-48VDC redundant · -30°C to +75°C


Rugged features for industrial operation

  • Fiber reach - transmits data up to 60 km via single-mode fiber
  • Redundant power input - dual power inputs ensure continuous operation
  • Alarm relay output - alerts on power failure or fault
  • Metal housing with DIN-rail - easy mounting in cabinets and panels
  • Wide operating temperature - reliable performance in harsh environments


Application areas

The switch suits applications where Ethernet signals must be transmitted over long distances in industrial environments.

  • Factory automation
  • Traffic and infrastructure control
  • Surveillance systems
  • Remote production facilities


A robust and reliable solution for long-distance Ethernet networking in demanding industrial environments.