Item number PORT-UNMAN-ETHER-SWITC-9

5-Port Unmanaged Ethernet Switch, 4x RJ45, 1x Single-Mode Fiber SC 30km

4 x RJ-45 10/100Base-TX ports
1 x 100Base-FX single-mode SC port
Fiber distance up to 30km
Store and forward switching
MAC table 2048, buffer 1 Mbit
IEEE 802.3x flow control
Redundant power input, reverse polarity protection
Relay alarm output 2A @ 30VDC
Metal casing, DIN-rail mounting, IP30
12-48VDC redundant input
131 x 25 x 168 mm
-30C to +75C (special components required)

318.92 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.2 A @ 24 VDC
Dimensions (mm) 25 x 168 x 131 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that need to combine copper and fiber connections. It extends network reach over long distances via a single-mode fiber port while maintaining stable communication between local devices.


4 x RJ-45 10/100Base-TX · 1 x 100Base-FX SC fiber, up to 30 km · 12-48VDC redundant input · -30°C to +75°C


Rugged features for demanding environments

  • Long-range fiber port - enables connections up to 30 km via single-mode fiber
  • Redundant power supply - dual voltage inputs ensure high reliability
  • Alarm relay - alerts on power failure or link loss
  • Metal housing with IP30 - protects against dust and mechanical stress
  • Wide operating temperature - reliable performance in cold and hot conditions


Application areas

The switch suits industrial installations where network connections must span long distances or operate in electrically noisy environments.

  • Factory automation
  • Traffic and infrastructure control
  • Surveillance systems
  • Building management in industrial facilities


A robust and reliable solution for connecting copper and fiber networks in demanding industrial environments.