Item number PORT-UNMAN-ETHER-SWITC-8

5-Port Unmanaged Ethernet Switch, 4x RJ45, 1x Single-Mode Fiber SC 60km

4 x 10/100Base-TX RJ-45 ports
1 x 100Base-FX SC, Single-Mode
Fiber distance up to 60 km
Store and forward switching
MAC table 2048, 1 Mbit buffer
IEEE 802.3x flow control
Redundant power input, reverse polarity protection
Relay alarm output 2A @ 30VDC
Metal casing, DIN-rail mounting
IP30, 12-48VDC
-30C to +75C (special components required)
25 x 168 x 131 mm

391.28 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.2 A @ 24 VDC
Dimensions (mm) 25 x 168 x 131 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 35 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for demanding industrial networks where long distance and stable operation are essential. It combines standard RJ-45 connections with a single-mode fiber port capable of extending the signal up to 60 km. The solution is ideal for connecting geographically separated devices without the complexity of managed networking equipment.


4 x RJ-45 10/100Base-TX · 1 x SC Single-Mode Fiber · 60 km Distance · 12-48VDC Redundant


Rugged Design for Harsh Industrial Environments

  • Fiber Port -enables long distances up to 60 km via single-mode fiber
  • Redundant Power Input -ensures continuous operation during power failure
  • Metal Housing with DIN-Rail -easy installation in cabinets and industrial setups
  • Relay Alarm Output -provides real time fault notification
  • Wide Operating Temperature -reliable performance in extreme conditions


Application Areas

The switch is well suited for industrial networks where distance and reliability are critical factors.

  • Manufacturing plants and factory automation
  • Transportation and traffic control systems
  • Surveillance and security systems over long distances
  • Energy and utility infrastructure


A reliable and rugged solution for industrial networks requiring long range connectivity and high uptime.