Item number PORT-POE-SWITC-4X-3

5-Port PoE Switch 4x 10/100TX with 100Base-FX Fiber Port

4 x 10/100Base-TX PoE ports
1 x 100Base-FX SC fiber port
IEEE 802.3af PoE, up to 15.4W/port
Multi-mode fiber, 2km distance
Store and forward wire speed switching
MAC table 1024, 3.2 Gbps bandwidth
IP30 metal casing, DIN-rail mount
ESD protection 4kV contact
18-32VDC
-30C to +75C (special components required)
25 x 168 x 133 mm

363.14 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 4 x RJ-45, 10/100Base-TX1 x 100 Base-FX, SC connector
Input Range +18 ~ +32 VDC
Consumption 0.24 A @ 24 VDC without PD loading;3.2 A @ 24 VDC with PD full loading;4.6 A @ 18 VDC with PD full loading
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is built for industrial networks that require PoE power delivery combined with fiber optic connectivity over longer distances. It combines four PoE ports with a dedicated fiber port for stable data transmission in demanding environments.


4x 10/100TX PoE · 1x 100Base-FX Fiber · IP30 Metal Housing · -30C to +75C


Rugged features for industrial use

  • PoE on all ports -up to 15.4W per channel per IEEE 802.3af
  • Fiber optic uplink -multi-mode connection up to 2 km
  • Wide operating temperature -reliable from -30C to +75C
  • DIN-rail mounting -easy installation in cabinets and enclosures
  • ESD and surge protection -increases operational reliability


Applications

The switch is well suited for industrial installations where long distances and electrical noise place demands on network equipment.

  • Factory automation
  • Surveillance systems with IP cameras
  • Traffic and infrastructure control
  • Building automation


The right choice when reliable PoE and fiber connectivity are needed in industrial environments.