Item number PORT-UNMAN-ETHER-SWITC-7

6-Port Unmanaged Ethernet Switch, 4x RJ45, 2x 100Base-FX SC Single-Mode, 30km

4 x RJ45 10/100Base-TX
2 x 100Base-FX SC Single-Mode
Distance up to 30 km
Store and forward switching
MAC table 2048 entries
Redundant power inputs
Relay alarm output 2A 30VDC
DIN-rail mounting
12-48VDC redundant input
31 x 157 x 123 mm (WxLxH)
-30C to +75C (special components required)

372.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 2 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.14 A @ 24 VDC
Dimensions (mm) 31 x 157 x 123 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm

Unmanaged Ethernet Switch

This unmanaged switch is designed for industrial networks that require stable data transmission over long distances. It combines standard copper ports with a single-mode fiber connection, making it well suited for connecting remote sites and production areas.


4 x RJ45 10/100Base-TX · 2 x 100Base-FX SC Single-Mode · 30 km distance · Redundant 12-48VDC


Robust design for industrial requirements

  • Fiber port - single-mode connection with distance up to 30 km
  • Redundant power supply - two inputs ensure continuous operation
  • Alarm relay - notifies in case of power failure or fault
  • Wide operating temperature - reliable performance in demanding environments
  • DIN-rail mounting - easy installation in cabinets and panels


Application areas

The switch suits applications where copper and fiber networks must be combined over longer distances.

  • Industrial automation
  • Transportation and traffic systems
  • Surveillance and security
  • Remote production facilities


A robust and reliable solution for extending networks over long distances with fiber optics.