Item number UNMAN-ETHER-SWITC-4X-2

Unmanaged Ethernet Switch 4x RJ45, 2x SC Fiber, Single-Mode 60km

4 x RJ45 10/100Base-TX ports
2 x 100Base-FX SC fiber ports
Single-mode fiber up to 60 km
Store and forward switching
MAC table 2048, 1 Mbit buffer
IEEE 802.3x flow control
Redundant power input
Relay alarm output 2A 30VDC
DIN-rail mounting, plastic case
12-48VDC redundant input
-30C to +75C (special components required)
31 x 157 x 123 mm

506.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 2 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.14 A @ 24 VDC
Dimensions (mm) 31 x 157 x 123 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 35 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm

Unmanaged Ethernet Switch with Fiber

This unmanaged Ethernet switch is built for industrial network infrastructure where long-distance connectivity and reliability are essential. It combines copper and fiber ports, allowing devices to be connected over long distances via single-mode fiber.


4 x RJ45 10/100Base-TX · 2 x SC Single-Mode Fiber · Up to 60 km Range · Redundant 12-48VDC Input


Reliable performance for industrial networks

  • Fiber ports - single-mode SC ports enable transmission up to 60 km
  • Store and forward - ensures reliable data processing and low error rate
  • Redundant power input - two inputs increase operational reliability
  • Alarm relay - notifies in case of power loss or fault
  • DIN-rail mounting - easy installation in cabinets and enclosures


Applications

The switch is suited for environments where network connections must cover long distances and reliability is critical.

  • Industrial automation
  • Surveillance and security systems
  • Infrastructure projects with long distances
  • Remote monitoring and control sites


A robust solution that reliably connects copper and fiber networks over long distances.