Item number UNMAN-ETHER-SWITC-4X

Unmanaged Ethernet Switch 4x 10/100Base-TX, 1x 100Base-FX Single-Mode SC, 30km

4 x 10/100Base-TX RJ-45 ports
1 x 100Base-FX SC, Single-Mode
Distance up to 30 km
Wavelength 1300 or 1310nm
Store and forward switching
MAC table 2048 entries
Redundant power inputs
Alarm relay output 2A @ 30VDC
DIN-Rail mounting, plastic casing
12-48VDC redundant input
-30C to +75C (special components required)
31 x 157 x 123 mm

277.38 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.2 A @ 24 VDC
Dimensions (mm) 31 x 157 x 123 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is designed for industrial networks that require combining copper and fiber connections over long distances. It is typically used to connect local devices via RJ-45 while extending the network over a single-mode fiber link. The switch requires no configuration and is ready to use out of the box.


4 x 10/100Base-TX · 1 x 100Base-FX Single-Mode · Up to 30 km · Redundant Power Input


Rugged Design for Industrial Use

  • Fiber Port -enables transmission over up to 30 km via single-mode fiber
  • Redundant Power Input -ensures reliable operation during power failure
  • Alarm Relay Output -notifies on power or link faults
  • DIN-Rail Mounting -easy installation in cabinets and enclosures
  • Wide Operating Temperature -reliable from -30C to +75C


Application Areas

The switch is well suited for environments where long distances and stable operation are essential.

  • Industrial automation
  • Surveillance systems
  • Transportation and infrastructure
  • Remote monitoring installations


A reliable solution for connecting remote network devices over fiber with industrial-grade dependability.