Item number PORT-UNMAN-ETHER-SWITC-6

5-Port Unmanaged Ethernet Switch, 4x RJ45, Single-Mode Fiber 60km

4 x RJ-45 10/100Base-TX
1 x 100Base-FX SC, Single-Mode
Distance up to 60 km
Wavelength 1300/1310nm
Store and forward switching
MAC table 2048, 1 Mbit buffer
IEEE 802.3x flow control
Redundant power inputs
Relay alarm output 2A 30VDC
DIN-Rail mounting
12-48VDC redundant input
-30C to 75C (special components required)

349.74 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 4 x RJ-45, 10/100Base-TX1 x 100 Base-FX, SC connector
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.2 A @ 24 VDC
Dimensions (mm) 31 x 157 x 123 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 35 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require connecting devices over long distances via single-mode fiber. It combines rugged reliability with simple plug-and-play installation and requires no configuration.


4 x RJ-45 10/100Base-TX · 1 x 100Base-FX SC Single-Mode · Up to 60 km · Redundant 12-48VDC input


Features Built for Reliable Operation

  • Long-range fiber port - supports connections up to 60 km via single-mode fiber
  • Redundant power inputs - two inputs ensure continuous operation during failure
  • Relay alarm output - notifies on power failure or other events
  • Store and forward processing - ensures reliable, error-free data transfer
  • DIN-rail mounting - easy installation in control cabinets and panels


Application Areas

The switch is suitable for industrial environments where stable network connections over long distances and under demanding conditions are required.

  • Factory automation
  • Traffic and infrastructure monitoring
  • Remote production facilities
  • Distributed SCADA networks


A rugged and reliable solution for long-distance fiber connections in demanding industrial environments.