Item number PORT-UNMAN-POE-SWITC-4

5-Port Unmanaged PoE Switch 4x 10/100 RJ45 PoE + 1x 100Base-FX SC Single-Mode, 24VDC DIN-Rail

4 x 10/100Base-TX RJ45 PoE ports
1 x 100Base-FX SC Single-Mode port
PoE up to 15.4W per port, 802.3af
Fiber distance up to 30 km
Wavelength 1300/1310nm
Store and forward switching
Memory bandwidth 3.2 Gbps
MAC table 1024 entries
DIN-rail mounting, plastic casing
18-32VDC input
30C to +75C (special components required)
31 x 157 x 113 mm

317.58 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +18 ~ +32 VDC
Consumption 0.24 A @ 24 VDC without PD loading;3.2 A @ 24 VDC with PD full loading;4.6 A @ 18 VDC with PD full loading
Dimensions (mm) 31 x 157 x 113 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is built for industrial networks that require combining PoE powered devices with long distance fiber connectivity. It suits surveillance, access control and automation tasks where reliable data transmission is essential.


4 x PoE RJ45 ports · 1 x Single-Mode fiber SC · Up to 30 km distance · DIN-Rail mounting


Features that make the difference

  • PoE power -up to 15.4W per port for cameras and access points
  • Fiber uplink -single-mode connectivity over long distances
  • Store and forward -stable switching at wire speed
  • Rugged design -wide temperature range and DIN-Rail mounting
  • Flow control -IEEE 802.3x reduces data loss under load


Application areas

The switch fits well into industrial and outdoor installations where distance and operational reliability matter.

  • Video surveillance systems
  • Industrial automation
  • Access control systems
  • Remote network installations


A rugged and space saving solution for reliable PoE and fiber communication in demanding environments.