Item number PORT-UNMAN-ETHER-SWITC-4

5-Port Unmanaged Ethernet Switch with PoE and Fiber SC Port, DIN-Rail

4 x RJ-45 10/100Base-TX PoE ports
1 x 100Base-FX SC Fiber port, Multi-Mode
PoE up to 15.4W per channel, 802.3af
Fiber distance up to 2km
Store and forward wire speed switching
MAC table 1024, buffer 512Kbit
IEEE 802.3x flow control
Plastic casing, DIN-Rail mounting
+46 ~ +55VDC for PoE output
31 x 157 x 113 mm (W x L x H)
-30C to +75C (special components required)

277.38 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.08 A @ 48 VDC without PD loading;1.5 A @ 48 VDC with PD full loading
Dimensions (mm) 31 x 157 x 113 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Plastic
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Voltage +48 VDC depending on power input
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber

This unmanaged Ethernet switch is built for industrial networks that require both PoE power delivery and fiber connectivity. It connects Ethernet devices through 10/100Base-TX ports while a fiber optic link provides stable data transmission over longer distances. The solution is well suited for demanding environments where reliability and simple installation are essential.


4 x RJ-45 PoE ports · 1 x Fiber SC port · Up to 15.4W PoE · DIN-Rail mounting


Features that make the difference

  • PoE power delivery - power and data over a single cable to connected devices
  • Fiber optic port - supports distances up to 2 km
  • Store and forward switching - ensures stable and accurate data handling
  • Flow control - reduces data loss under heavy load
  • Rugged design - suited for a wide temperature range and DIN-Rail mounting


Application areas

The switch fits well into industrial installations where stable network connectivity and flexible device placement are required.

  • Surveillance systems with PoE cameras
  • Industrial automation setups
  • Remote installations requiring fiber connectivity
  • Building installations with DIN-Rail mounting


A rugged and reliable solution for industrial networks where PoE and fiber connectivity need to work together.