Item number PORT-UNMAN-POE-SWITC-3

5-Port Unmanaged PoE Switch, 4x 10/100Base-TX + 1x 100Base-FX SC, 60km

4 x 10/100Base-TX RJ-45 PoE ports
1 x 100Base-FX SC, Single-Mode
Fiber distance up to 60 km
IEEE 802.3af PoE, up to 15.4W/port
Store and forward, wire speed
MAC table 1024, 3.2 Gbps bandwidth
IEEE 802.3x flow control
Metal casing, DIN-Rail mount
IP30 rated enclosure
+46 ~ +55VDC input for PoE
-30C to +75C (special components required)
25 x 168 x 133 mm (W x L x H)

372.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.08 A @ 48 VDC without PD loading;1.5 A @ 48 VDC with PD full loading
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Voltage +48 VDC depending on power input
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is built for industrial networks that require combining PoE-powered devices with long-distance fiber links. It combines four PoE ports with a single-mode fiber port supporting distances up to 60 km, making it suitable for demanding environments.


4x 10/100Base-TX PoE · 1x 100Base-FX SC · Up to 60 km · IP30 Metal Housing


Rugged Features for Industrial Use

  • PoE power supply - up to 15.4W per port with automatic detection
  • Long fiber range - single-mode fiber supports up to 60 km
  • Store and forward switching - ensures stable data transfer with low error rate
  • Metal housing with IP30 - protects against dust and physical impact
  • DIN-Rail mounting - easy installation in industrial cabinets


Applications

The switch is well suited for surveillance systems and distributed networks where long distances and PoE supply are required.

  • IP camera surveillance over long distances
  • Industrial automation and process monitoring
  • Remote network installations
  • Traffic and infrastructure monitoring


With the combination of PoE and long fiber range, this switch is the right choice for demanding industrial networks.