Item number PORT-UNMAN-SWITC-4X

5-Port Unmanaged Switch 4x PoE RJ45, 1x 100Base-FX SC Single-Mode

4 x 10/100Base-TX RJ45, PoE 802.3af
1 x 100Base-FX SC, Single-Mode
Fiber distance up to 30 km
Up to 15.4W PoE per channel
Store and forward wire speed switching
MAC table 1024, buffer 512 Kbit
Metal casing, DIN-Rail mounting
IP30 rated enclosure
+46 ~ +55VDC input for PoE output
-30C to +75C (special components required)
Dimensions: 25 x 168 x 133 mm

336.34 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.08 A @ 48 VDC without PD loading;1.5 A @ 48 VDC with PD full loading
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Voltage +48 VDC depending on power input
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is designed for industrial networks that require stable data transmission over long distances combined with Power over Ethernet. The unit combines four PoE ports with a fiber port for extended connectivity in demanding environments.


4 x PoE RJ45 Ports · 1 x 100Base-FX Fiber Port · Up to 30 km Range · DIN-Rail Mounting


Features that Make the Difference

  • PoE Power Supply - up to 15.4W per port for cameras and access points
  • Fiber Optic Port - single-mode SC for longer distances
  • Robust Metal Housing - protects against dust and moisture (IP30)
  • Wide Temperature Range - operation from -30 to +75 degrees C
  • Wire Speed Switching - store and forward technology for reliable data flow


Applications

The switch is suitable for industrial installations where long distances and stable networks are essential.

  • Surveillance systems with IP cameras
  • Industrial automation systems
  • Remote network connections
  • DIN-Rail installations in cabinets and panels


A robust and reliable solution for industrial networks requiring long range and PoE power.