Item number PORT-POE-SWITC-SINGL

5-Port PoE Switch with Single-Mode Fiber SC, 4x 10/100Base-TX PoE, 60km

4 x 10/100Base-TX PoE ports
1 x 100Base-FX SC, Single-Mode
IEEE 802.3af PoE, up to 15.4W/port
Fiber distance up to 60km
Store and forward wire speed switching
MAC table 1024, 512Kbit buffer
Memory bandwidth 3.2 Gbps
ESD protection 4kV contact
Plastic casing, DIN-Rail mounting
46-55VDC input for PoE output
31 x 157 x 113 mm
-30C to +75C (special components required)

321.60 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.08 A @ 48 VDC without PD loading;1.5 A @ 48 VDC with PD full loading
Dimensions (mm) 31 x 157 x 113 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Voltage +48 VDC depending on power input
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is designed for industrial networks where long-distance connectivity and reliable PoE power are essential. It combines copper ports with PoE support and a single-mode fiber port for extended reach.


4 x PoE RJ-45 ports · 1 x Single-Mode fiber SC · Up to 60 km distance · -30°C to +75°C


Robust features for industrial operation

  • PoE support - up to 15.4W per port with automatic detection
  • Long-distance fiber port - up to 60 km at full duplex
  • Wire speed switching - store and forward processing ensures stable data transfer
  • Wide operating temperature - reliable from -30°C to +75°C
  • DIN-Rail mounting - easy installation in industrial cabinets


Application areas

The switch is suitable for industrial environments that require stable network connections over long distances combined with PoE power.

  • Surveillance systems with IP cameras
  • Industrial automation
  • Remote network installations
  • Building automation


A robust and reliable solution for industrial networks requiring long-distance connectivity and PoE power.