Item number PORT-UNMAN-ETHER-SWITC-3

5-Port Unmanaged Ethernet Switch with Single-Mode Fiber SC, PoE 802.3af

4 x RJ-45 10/100Base-TX PoE ports
1 x 100Base-FX SC, Single-Mode
Fiber distance up to 30 km
PoE up to 15.4W per channel
IEEE 802.3af compliant
Store and forward, wire speed
MAC table 1024, buffer 512 Kbit
ESD protection IEC 61000-4-2 4kV
DIN-Rail mounting, plastic casing
-30C to +75C (special components required)
46-55VDC input for PoE output
31 x 157 x 113 mm (W x L x H)

284.08 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.08 A @ 48 VDC without PD loading;1.5 A @ 48 VDC with PD full loading
Dimensions (mm) 31 x 157 x 113 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Voltage +48 VDC depending on power input
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that need to combine PoE-powered devices with fiber optic extension. It bridges local 10/100Base-TX devices with a single-mode fiber segment, making it well suited for surveillance and distributed installations.


4 x RJ-45 PoE ports · 1 x SC Single-Mode fiber · Up to 30 km distance · -30 to +75°C


Features that ensure stable operation

  • PoE support -delivers up to 15.4W per channel per IEEE 802.3af
  • Fiber uplink -single-mode SC connection with distance up to 30 km
  • Store and forward switching -ensures reliable data transfer at wire speed
  • Wide operating temperature -runs stable from -30°C to +75°C
  • DIN-rail mounting -easy installation in industrial cabinets and panels


Application areas

The switch fits environments where PoE devices need to be connected over long distances via fiber.

  • Industrial automation
  • Surveillance systems with IP cameras
  • Distributed monitoring stations
  • Remote network installations


A robust solution for companies needing reliable PoE connectivity over fiber in demanding environments.