Item number PORT-UNMAN-ETHER-SWITC-2

8-Port Unmanaged Ethernet Switch, DIN-Rail, -40 to 75C, 12-48VDC

8 x RJ-45 10/100Base-TX ports
IEEE 802.3, 802.3u, 802.3x
Store and forward, wire speed
MAC table 2048, 3.2 Gbps bandwidth
VLAN, QoS, Port Trunk, SMTP, TELNET
Redundant STP and Ring support
3 x digital input, 3 x relay output
1 x RS-232 console, 1 x RS-485
Redundant dual power inputs
Alarm relay output 2A 30VDC
12-48VDC redundant inputs
-40 to 75C (special components required)

569.50 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

DIP Switch Yes, Normal Run / Repair Mode
Installation DIN-rail mounting or wall mounting
Isolation 1500 Vrms 1 minute
Type Open CollectorWet Contact
Operating Temperature 40 °C ~ +75 °C
Status Power, 10/100M, Link/Act, Master
Ports 8 x RJ-45, 10/100Base-TX1 x RS-232 (Console)1 x RS-485
Input Range +12 ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Redundant Power Inputs Yes
Consumption 0.25 A @ 24 VDC
Dimensions (mm) DIN-rail mounting: 47 x 175 x 129 (W x L x H)Wall mounting: 51 x 190 x 129 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
Channels 3
Sink/Source (NPN/PNP) Sink (NPN)
ON Voltage Level +19 VDC ~ +30 VDC
OFF Voltage Level +11 VDC Max.
Load Current 30V/100 mA Max.
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Casing Metal
Ingress Protection Rating IP30
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Redundant Strategy STP, Ring

Unmanaged Ethernet Switch

This unmanaged Ethernet switch is built for industrial networks where reliability and continuous uptime are essential. It offers 8 x 10/100Base-TX ports and supports redundant topologies via STP and Ring, ensuring stable network operation even in the event of a link failure.


8 x RJ-45 ports · Redundant power 12-48VDC · -40 to 75°C · DIN-rail mounting


Robust features for industrial use

  • Redundant power - dual power inputs ensure continuous operation
  • Ring redundancy - fast network recovery after failure
  • Digital I/O - 3 inputs and 3 outputs for monitoring and control
  • Alarm relay - automatic alerts on fault conditions
  • Wide temperature range - operation from -40°C to +75°C in harsh environments


Application areas

The switch is well suited for industrial environments where reliable network connectivity is critical.

  • Manufacturing and factory automation
  • Traffic and infrastructure monitoring
  • Power and utility systems
  • Building automation and SCADA systems


A robust and reliable solution for demanding industrial networks.