Item number PORT-UNMAN-SWITC-6X

8-Port Unmanaged Switch 6x RJ45 10/100M, 2x 100Base-FX Fiber, DIN

6 x RJ45 10/100Base-TX ports
2 x 100Base-FX fiber ports
Multi-mode, 2km distance
IEEE 802.3, 802.3u, 802.3x
VLAN, QoS, Port Trunk, STP, Ring
3 x digital input, 3 x output
1 x RS-232, 1 x RS-485
Relay alarm output 2A/30VDC
Metal casing, IP30
12-48VDC redundant dual input
-30C to +75C (special components required)
DIN-rail or wall mounting

719.58 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

DIP Switch Yes, Normal Run / Repair Mode
Installation DIN-rail mounting or wall mounting
Isolation 1500 Vrms 1 minute
Type Open CollectorWet Contact
Operating Temperature 30 °C ~ +75 °C
Status 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ports 1 x RS-232 (Console)1 x RS-4856 x RJ-45, 10/100Base-TX2-port 100 Base-FXST connector
Input Range +12 VDC ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Redundant Power Inputs Yes
Consumption 0.3 A @ 24 VDC
Dimensions (mm) DIN-rail mounting: 47 x 175 x 142 (W x L x H)Wall mounting: 51 x 190 x 142 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
Channels 3
Sink/Source (NPN/PNP) Sink (NPN)
ON Voltage Level +19 VDC ~ +30 VDC
OFF Voltage Level +11 VDC Max.
Load Current 30V/100 mA Max.
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 34 ~ -31 dBm
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Redundant Strategy STP, Ring
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output 20 dBm Min.-14 dBm Max.

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require stable data transmission over long distances via fiber optics. It combines standard RJ-45 ports with redundant fiber links and digital I/O functions, making it suitable for automation tasks in demanding environments.


6 x RJ-45 10/100Base-TX · 2 x 100Base-FX fiber · -30C to +75C · 12-48VDC redundant input


Features that ensure stable operation

  • Redundant strategy - STP and Ring topology support for high reliability
  • Digital I/O - 3 digital inputs and 3 outputs for monitoring and control
  • Serial communication - built-in RS-232 and RS-485 for device integration
  • Alarm relay - relay output signals fault conditions
  • Rugged construction - metal casing with IP30 and wide temperature range


Application in industrial environments

The switch suits applications where long distance, electrical noise, or extreme temperatures place demands on network equipment.

  • Factory automation
  • Building management
  • Monitoring systems
  • Transportation and infrastructure projects


A rugged and reliable solution for industrial networks requiring a fiber connection.