Item number PORT-UNMAN-ETHER-SWITC

8-Port Unmanaged Ethernet Switch, 6x RJ-45 + 2x 100Base-FX Fiber, DIN-rail

6 x RJ-45 10/100Base-TX ports
2 x 100Base-FX fiber ports, Multi-Mode
Fiber distance up to 2km
IEEE 802.3, 802.3u, 802.3x
VLAN, QoS, Port Trunk, STP, Ring
MAC table 2048, 3.2 Gbps bandwidth
3 x digital input, 3 x digital output
1 x RS-232 console, 1 x RS-485
Relay alarm output 2A @ 30VDC
12-48VDC redundant dual input
DIN-rail: 47 x 175 x 142 mm
-30C to +75C (special components required)

719.58 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

DIP Switch Yes, Normal Run / Repair Mode
Installation DIN-rail mounting or wall mounting
Isolation 1500 Vrms 1 minute
Type Open CollectorWet Contact
Operating Temperature 30 °C ~ +75 °C
Status 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ports 6 x RJ-45, 10/100Base-TX2-port 100 Base-FXSC connector1 x RS-232 (Console)1 x RS-485
Input Range +12 VDC ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Redundant Power Inputs Yes
Consumption 0.3 A @ 24 VDC
Dimensions (mm) DIN-rail mounting: 47 x 175 x 142 (W x L x H)Wall mounting: 51 x 190 x 142 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
Channels 3
Sink/Source (NPN/PNP) Sink (NPN)
ON Voltage Level +19 VDC ~ +30 VDC
OFF Voltage Level +11 VDC Max.
Load Current 30V/100 mA Max.
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 34 ~ -31 dBm
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Redundant Strategy STP, Ring
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output 20 dBm Min.-14 dBm Max.

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for demanding industrial networks that require a combination of copper and fiber connections. It is commonly used to extend network segments over long distances while maintaining reliable data transmission in harsh environments.


6 x RJ-45 10/100Base-TX · 2 x 100Base-FX fiber · -30C to +75C · 12-48VDC redundant input


Features for stable operation

  • Multi-Mode fiber -supports distances up to 2 km
  • Redundant strategy -STP and Ring for high reliability
  • Digital I/O -3 inputs and 3 outputs for monitoring and control
  • Alarm relay -alerts on fault conditions
  • Redundant power -dual inputs increase uptime


Application areas

The switch suits industrial installations where robustness and long-term reliability are essential.

  • Factory automation
  • Process monitoring
  • Building automation
  • Transport and infrastructure projects


A robust and reliable solution for industrial networks that require fiber connectivity.