Item number UNMAN-ETHER-SWITC-3X

Unmanaged Ethernet Switch 3x RJ45, 2x 100Base-FX Single-Mode, Redundant Ring

3 x RJ-45 10/100Base-TX ports
2 x 100Base-FX SC Single-Mode
Fiber distance up to 30 km
Redundant ring, STP support
1 x RS-232/RS-485 port
Modbus/RTU, Modbus/TCP
Store and forward switching
Alarm relay output 2A 30VDC
DIN-rail mounting, IP30
-30C to +75C (special components required)
12-48VDC redundant power input
64 x 118 x 101 mm

730.30 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

DIP Switch Yes, 1x Redundancy mode confi guration1x Max. Recovery time selection
Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ + 75 °C
Status 10/100M, Link/Act/Backup, Full duplex/Half duplex (Fiber Port)
Ports 2-port 100 Base-FXSC connector3 x RJ-45, 10/100Base-TX1 x RS-232/RS-485
Input Range +12 ~ +48 VDC
Redundant Power Inputs Yes
Consumption 0.4 A @ 24 VDC
Dimensions (mm) 64 x 118 x 101 (W x L x H)
Storage Temperature 40 °C ~ + 85 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
Protocol Modbus/RTU, Modbus/TCP
Mode Single-Mode
Casing Plastic
Ingress Protection Rating IP30
RX Sensitivity 34 dBm
Standards IEEE 802.3, IEEE 802.3u, IEEE802.3x
Processing Type Store & forward wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Redundant Strategy STP, Ring
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 gm
Distance 30 km, (9/125 gm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is built for industrial networks requiring long-distance connectivity and high reliability. It combines Ethernet ports with a single-mode fiber connection and supports redundant ring topology for maximum uptime.


3x RJ-45 10/100Base-TX · 2x 100Base-FX Single-Mode · Up to 30 km · -30C to +75C


Features for reliable operation

  • Redundant ring - fast network recovery in case of failure
  • Modbus/RTU and Modbus/TCP - easy integration into existing SCADA systems
  • Redundant power inputs - continued operation during power loss
  • Alarm relay - instant fault notification to monitoring systems
  • 1500 Vrms isolation - protection against electrical interference


Typical applications

The switch is well suited for demanding environments requiring long distances and stable communication.

  • Factory automation
  • Water and wastewater treatment
  • Traffic control systems
  • Remote plant monitoring


A robust solution for long-distance networks with high demands on reliability and redundancy.