Item number SERIA-PORT-SHARE-MODUL-2

Serial Port Sharer Module, 2x RS-485 to Ethernet PoE, DIN-Rail

32-bit ARM CPU
10/100 Base-TX RJ45, PoE 802.3af
2 x RS-485 ports
Baud rate up to 115200 bps
Bias resistor 1k Ohm
Parity: None, Odd, Even, Mark, Space
Data bits 5-8, Stop bits 1-2
RS-485 up to 254 nodes
DIN-rail mounting
-25 to +75C operating temp
0.07A @ 24VDC power consumption
52 x 27 x 95 mm

146.06 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 32-bit ARM
Installation DIN-Rail Mounting
Operating Temperature -25 ~ +75 °C
Ports 2 x RS-48510/100 Base-TX, 8-pin RJ-45 x 1 (Auto-negotiating, Auto-MDI/MDIX, LED indicator)PoE (IEEE 802.3af, Class 1)
Consumption 0.07 A @ 24 VDC
Dimensions (mm) 52 mm x 27 mm x 95 mm (W x L x H)
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Baud Rate 115200 bps Max.
Parity None, Odd, Even, Mark, Space
Data Bit 5, 6, 7, 8
Stop Bit 1, 2
Casing Plastic
Bias Resistor Yes, 1 KΩ
Node Address RS-485 254 Nodes(max.)

Serial Port Sharer Module

This serial port sharer module lets multiple network hosts share a single RS-485 serial device over Ethernet. It is designed for industrial automation setups where reliable serial-to-Ethernet connectivity is essential.


2 x RS-485 · 10/100 PoE Ethernet · DIN-Rail · -25 to +75C


Key Features

  • 32-bit ARM processor - reliable protocol handling
  • PoE powered - reduces cabling requirements
  • Dual RS-485 ports - connect two serial devices
  • Configurable serial settings - baud rate, parity, data/stop bits
  • Wide operating temperature - suited for harsh environments


Typical Applications

The module fits well in industrial networks that need to bridge legacy serial equipment to Ethernet infrastructure.

  • Factory automation
  • Building management systems
  • Remote monitoring stations
  • Industrial control networks


A compact, PoE-powered solution for reliable serial-to-Ethernet connectivity in demanding industrial environments.