Item number PROGR-DEVIC-SERVE-PORT-4

Programmable Device Server with 8-Port Serial to Ethernet

80186-80MHz compatible CPU
6 x RS-232 (3-wire) ports
1 x RS-232 (5-wire) port
1 x RS-485 port
10/100 Base-TX Ethernet RJ-45
Max baud rate 115200bps
Watchdog timer
Node address up to 254
DIN-Rail or wall mounting
10-30VDC
-25-75C (special components required)
72 x 35 x 123 mm

432.82 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)6 x 3-wire RS-2321 x 5-wire RS-2321 x RS-485
Consumption 2.7 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +10 ~ 30 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM8
Stop Bit 1, 2: for COM1 ~ COM8
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects multiple serial devices to an Ethernet network, allowing remote monitoring and control of industrial equipment. It supports a mix of RS-232 and RS-485 interfaces for flexible integration with legacy and modern devices. Built for continuous operation, it is ideal for industrial automation and remote data acquisition.


8 Serial Ports · 10/100 Ethernet · -25 to 75°C Operation · DIN-Rail Mounting


Built for Flexible Serial Connectivity

  • Multiple Serial Interfaces - combines RS-232 and RS-485 ports for broad device compatibility
  • Programmable Firmware - onboard flash and SRAM allow custom logic and protocol handling
  • Watchdog Timer - automatically resets the unit if the system becomes unresponsive
  • Wide Operating Temperature - runs reliably from -25°C to 75°C in harsh environments
  • Compact DIN-Rail Design - fits easily into control cabinets with DIN-rail or wall mounting


Typical Applications

The device server suits environments where serial equipment must be integrated into Ethernet-based control systems.

  • Industrial automation networks
  • Remote monitoring of PLCs and sensors
  • Building management systems
  • Utility and infrastructure monitoring


A robust choice for bridging serial devices to Ethernet in demanding industrial settings.