Item number PROGR-DEVIC-SERVE-SERIA

Programmable Device Server with 6 Serial Ports, RS-232/485, 10/100 Ethernet

80186-80MHz compatible CPU
10/100 Base-TX Ethernet port
4x 3-wire RS-232, 1x 5-wire RS-232
1x RS-485, up to 115200 bps
1x Digital Input, Dry Contact
2x Digital Output, Open Collector
Watchdog Timer
Metal casing, wall mounting
10-30VDC power input
2.7W power consumption
-25-75°C (special components required)
102 x 29 x 125 mm (W x L x H)

447.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 4 x 3-wire RS-2321 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.7 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 21
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM6
Stop Bit 1, 2: for COM1 ~ COM6
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices to Ethernet networks, converting RS-232 and RS-485 signals for remote monitoring and control. It is built for industrial environments requiring reliable data communication and digital I/O control.


6 Serial Ports · 10/100 Ethernet · Digital I/O · Wide Temperature Range


Key Features

  • Multiple Serial Ports - supports 4x 3-wire RS-232, 1x 5-wire RS-232 and 1x RS-485 for flexible device connectivity
  • 10/100 Base-TX Ethernet - auto-negotiating port with auto MDI/MDI-X for easy network integration
  • Digital I/O - 1x dry contact input and 2x open collector outputs for local control tasks
  • Watchdog Timer - ensures automatic recovery from system faults for continuous operation
  • Rugged Metal Housing - wall-mountable design rated for -25 to 75°C operation


Typical Applications

The device server is suited for industrial automation environments where serial equipment must be integrated into Ethernet-based control systems.

  • Factory automation networks
  • Remote monitoring of serial equipment
  • Building management systems
  • Industrial data acquisition


A robust, flexible solution for bridging serial devices with Ethernet networks in demanding industrial settings.