Item number PROGR-SERIA-DEVIC-SERVE-2

Programmable Serial Device Server, 6-Port RS-232/485 to Ethernet

Serial-to-Ethernet device server
80186-80MHz compatible CPU
5x RS-232, 1x RS-485 ports
10/100 Base-TX Ethernet port
Baud rate up to 115200 bps
1x DI, 2x Open Collector DO
Built-in watchdog timer
Max 254 node address
Metal casing, wall mount
+10-30VDC power input
102 x 29 x 125 mm (WxLxH)
-25~75°C (special components required)

432.82 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)4 x 3-wire RS-2321 x 5-wire RS-2321 x RS-485
Consumption 2.0 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 12
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM6
Stop Bit 1, 2: for COM1 ~ COM6
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

The Programmable Device Server is a rugged serial-to-Ethernet gateway designed to connect multiple serial devices to an Ethernet network. It is built for industrial environments and supports flexible programming for custom device communication tasks.


5x RS-232 / 1x RS-485 · 10/100 Base-TX Ethernet · -25 to 75°C Operation · Metal Housing


Key Features

  • Multi-Protocol Serial Support - Connects up to 6 serial devices via RS-232 and RS-485
  • Ethernet Connectivity - 10/100 Base-TX port with auto MDI/MDI-X for flexible network wiring
  • Digital I/O - Built-in dry contact input and open collector outputs for monitoring and control
  • Wide Operating Temperature - Rated from -25°C to +75°C for harsh industrial conditions
  • Robust Metal Casing - Designed for wall mounting in demanding environments


Typical Applications

The device server suits industrial automation setups where serial equipment needs to be integrated into Ethernet-based control systems.

  • Factory automation networks
  • Remote monitoring of serial devices
  • Building management systems
  • Process control and SCADA integration


A reliable choice for bridging serial devices to Ethernet in demanding industrial settings.