Item number PROGR-DEVIC-SERVE-PORT-3

Programmable Device Server, 6-Port RS-232/485, Ethernet, DIN-Rail

80186-80MHz Compatible CPU
10/100 Base-TX RJ-45 Ethernet
6 Serial Ports: RS-232/RS-485
1x Digital Input, Dry Contact
2x Digital Output, Open Collector
Watchdog Timer
16KB EEPROM, 512KB Flash/SRAM
DIN-Rail or Wall Mounting
-25 to +75C Operating Temp
10-30VDC Power Input, 2.7W
72 x 35 x 123mm (WxLxH)

416.74 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 4 x 3-wire RS-2321 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.7 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 21
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM6
Stop Bit 1, 2: for COM1 ~ COM6
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices to Ethernet networks, converting RS-232, RS-422 and RS-485 signals for industrial automation and remote monitoring applications.


6 Serial Ports · 10/100 Ethernet · Digital I/O · DIN-Rail Mounting


Key Features and Benefits

  • Multiple Serial Ports - connects up to 6 serial devices simultaneously
  • 10/100 Base-TX Ethernet - integrates devices directly into your network
  • Digital Input/Output - monitors and controls external equipment
  • Wide Operating Temperature - reliable performance from -25 to +75°C
  • Compact Design - fits easily on DIN-rail or wall mounting


Typical Applications

The device server is suitable for industrial environments where serial equipment needs network connectivity.

  • Factory automation
  • Remote equipment monitoring
  • Building management systems
  • Data acquisition networks


A reliable choice for bridging serial devices to Ethernet networks in demanding industrial settings.