Item number PROGR-DEVIC-SERVE-PORT-2

Programmable Device Server, 6-Port Serial to Ethernet, DI/DO, -25-75°C

80186-80MHz or compatible CPU
6 Serial Ports: RS-232 / RS-485
10/100Base-TX Ethernet, RJ-45
1x Digital Input, Dry Contact
2x Digital Output, Open Collector
Watchdog Timer
512KB Flash, 512KB SRAM, 16KB EEPROM
Baud Rate up to 115200 bps
DIN-Rail or Wall Mounting
+10-30VDC, 2.0W
72 x 35 x 123 mm
-25-75°C (special components required)

402.00 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 4 x 3-wire RS-2321 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.0 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 21
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM6
Stop Bit 1, 2: for COM1 ~ COM6
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Serial Device Server

A Serial Device Server connects RS-232 and RS-485 serial equipment to Ethernet networks, allowing legacy devices to communicate over TCP/IP. It combines multiple serial ports with digital I/O for monitoring and control in industrial environments.


6 Serial Ports · 10/100Base-TX Ethernet · Digital I/O · -25 to 75°C


Key Features

  • Multiple Serial Ports - 6x RS-232/RS-485 ports for connecting diverse legacy devices
  • Ethernet Connectivity - 10/100Base-TX RJ-45 port with auto MDI/MDI-X for flexible network wiring
  • Digital I/O - 1x dry contact input and 2x open collector outputs for status monitoring and control
  • Watchdog Timer - Automatic system recovery ensures continuous operation
  • Wide Operating Temperature - Operates from -25 to +75°C in demanding industrial environments


Typical Applications

The device server is suitable for industries needing to integrate serial equipment into Ethernet-based networks.

  • Factory automation
  • Building management systems
  • Remote monitoring and control
  • Legacy equipment integration


A reliable choice for bridging serial devices with modern Ethernet infrastructure.