Item number PROGR-DEVIC-SERVE-RS-8

Programmable Device Server, RS-232/485 to Ethernet, -25 to 75°C

80186-80MHz compatible CPU
10/100Base-TX Ethernet RJ-45
1 x RS-232, RS-485 serial port
115200bps max baud rate
Up to 254 node addresses
Built-in watchdog timer
Metal casing, wall mounting
5-90% RH non-condensing
2.0W power consumption
-25-75°C (special components required)
+10-30VDC power supply
102 x 29 x 125 mm (WxLxH)

418.08 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2324 x RS-485
Consumption 2.0 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +10 ~ 30 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM5
Stop Bit 1, 2: for COM1 ~ COM5
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

The Programmable Device Server connects RS-232 and RS-485 serial devices to Ethernet networks, enabling remote monitoring and control of industrial equipment. It is designed for continuous operation in demanding environments and can be freely programmed for custom communication protocols.


10/100Base-TX Ethernet · RS-232/RS-485 serial port · -25 to 75°C operation · Metal wall-mount casing


Key features

  • Wide temperature range - operates reliably from -25°C to +75°C
  • Flexible serial support - RS-232 and RS-485 with up to 254 node addresses
  • Built-in watchdog timer - ensures automatic recovery from system faults
  • Robust metal enclosure - suitable for wall mounting in industrial settings
  • Low power consumption - only 2.0W draw from a 10-30VDC supply


Typical applications

The device server is well suited for industrial automation and remote device networking where serial equipment must be integrated into Ethernet infrastructures.

  • Factory automation networks
  • Remote monitoring of serial devices
  • Building management systems
  • Utility and process control


A reliable choice for bridging serial devices to Ethernet in harsh industrial environments.