Item number PROGR-DEVIC-SERVE-4X-4

Programmable Device Server, 4x DI/4x DO, RS-232/485, 10/100 Ethernet

80186-80 MHz CPU or compatible
10/100 Base-TX Ethernet port
3x RS-232, 1x RS-485 Ports
4x Dry Contact Digital Input
4x Open Collector Output (NPN)
512KB Flash, 512KB SRAM, 16KB EEPROM
Watchdog Timer
Metal Casing, Wall Mounting
10 - 30VDC Power Input
102 x 29 x 125 mm (WxLxH)
-25-75C (special components required)

387.26 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 2 x 3-wire RS-2321 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.7 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM4
Stop Bit 1, 2: for COM1 ~ COM4
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects RS-232 and RS-485 serial devices to Ethernet networks, while providing built-in digital I/O for direct control tasks. It is designed for industrial automation environments where reliable data conversion and monitoring are required.


10/100 Base-TX Ethernet · 3x RS-232, 1x RS-485 · 4x Digital Input / 4x Digital Output · -25 to 75C Operation


Key Features

  • Wide Operating Temperature - runs reliably from -25C to 75C
  • Metal Housing - robust enclosure for harsh industrial environments
  • Built-in Digital I/O - 4 dry contact inputs and 4 open collector outputs
  • Flexible Serial Ports - supports multiple RS-232 and RS-485 configurations
  • Watchdog Timer - ensures automatic recovery from system faults


Typical Applications

The device server fits well in installations that require remote monitoring and serial-to-Ethernet conversion.

  • Industrial automation systems
  • Remote monitoring and control
  • Building management systems
  • SCADA and data acquisition


A reliable choice for connecting serial devices and I/O signals to an Ethernet network in demanding industrial settings.