Item number PROGR-DEVIC-SERVE-ETHER-3

Programmable Device Server with Ethernet, RS-232/485, 4 DI/4 DO

10/100 Base-TX Ethernet RJ-45
3x RS-232 (2x 3-wire, 1x 5-wire)
1x RS-485 serial port
4 x Digital Input, Dry Contact
4 x Digital Output, Open Collector
Baud rate up to 115200 bps
80186-80MHz CPU or compatible
Watchdog Timer
Metal casing, wall mounting
10-30VDC power input
102 x 29 x 125 mm (WxLxH)
-25-75C (special components required)

372.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)2 x 3-wire RS-2321 x 5-wire RS-2321 x RS-485
Consumption 2.0 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM4
Stop Bit 1, 2: for COM1 ~ COM4
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices to Ethernet networks while providing built-in digital input and output channels for direct control tasks. It is designed for industrial environments that require reliable serial-to-Ethernet communication combined with local I/O handling.


10/100Base-TX Ethernet · 3x RS-232 and RS-485 · 4 DI / 4 DO · -25 to +75°C


Built for Serial-to-Ethernet Communication and Control

  • Multiple serial ports - connect legacy RS-232 and RS-485 devices to an Ethernet network
  • Digital I/O - 4 dry contact inputs and 4 open collector outputs for direct control
  • Wide operating temperature - operates reliably from -25 to +75°C
  • Metal housing - durable enclosure suited for industrial wall mounting
  • Watchdog timer - automatically restores operation after a system fault


Typical Applications

The device server suits environments where serial equipment must be integrated into modern Ethernet infrastructure.

  • Factory automation networks
  • Remote monitoring and control systems
  • Building management systems
  • Integration of legacy serial devices


A robust choice for connecting serial equipment reliably to Ethernet networks in demanding industrial settings.