Item number SERIA-DEVIC-SERVE-RS-5

Serial Device Server with RS-232/RS-485 and Ethernet

Serial Device Server, RJ45 Ethernet
4 x Digital Input, Dry Contact
4 x Digital Output, Open Collector
2 x RS-232, 1 x RS-485 Serial Ports
Baud Rate up to 115200 bps
DIN-Rail or Wall Mounting
Plastic Casing
10-30VDC
-25~75C (special components required)
72 x 35 x 123 mm (W x L x H)

341.70 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)2 x 3-wire RS-2321 x 5-wire RS-2321 x RS-485
Consumption 2.0 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM4
Stop Bit 1, 2: for COM1 ~ COM4
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Serial Device Server

This serial device server connects RS-232 and RS-485 serial devices to Ethernet networks, while also providing digital I/O for monitoring and control. It is designed for industrial automation environments where reliable data communication and remote signaling are required.


10/100 Ethernet · RS-232/RS-485 · 4x DI / 4x DO · -25 to 75C


Built for Reliable Industrial Communication

  • Multiple Serial Ports - supports RS-232 and RS-485 for flexible device connections
  • Digital I/O - 4 dry contact inputs and 4 open collector outputs for control tasks
  • Wide Operating Range - operates from -25C to +75C for harsh environments
  • Watchdog Timer - ensures automatic recovery from system faults
  • Flexible Mounting - DIN-rail or wall mounting for easy installation


Typical Applications

The device server fits well in industrial control and monitoring systems where serial equipment must be integrated into an Ethernet network.

  • Remote monitoring of factory equipment
  • Connecting legacy RS-232/RS-485 devices to Ethernet
  • Building automation and control panels
  • Distributed I/O for process control


A robust and versatile solution for bridging serial devices with Ethernet in demanding industrial settings.