Item number PROGR-DEVIC-SERVE-10-2

Programmable Device Server, 10/100 Ethernet, RS-232/485, -25 to 75°C

CPU 80186-80MHz compatible
10/100 Base-TX RJ-45 Ethernet
2x RS-232 (5-wire), 1x RS-232 (9-wire)
1x RS-485, up to 115200bps
Watchdog timer
5-digit 7-segment display
16KB EEPROM, 512KB Flash/SRAM
DIN-rail or wall mounting
-25~75°C (special components required)
10-30VDC, 2.7W
72 x 35 x 123 mm

356.44 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)2 x 5-wire RS-2321 x 9-wire RS-2321 x RS-485
Consumption 2.7 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +10 ~ 30 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM4
Stop Bit 1, 2: for COM1 ~ COM4
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects RS-232 and RS-485 serial devices to Ethernet networks, letting industrial equipment communicate over standard IP infrastructure. It is designed for continuous operation in harsh environments and supports custom firmware for flexible protocol handling.


80186-80MHz CPU · 10/100 Base-TX Ethernet · RS-232/RS-485 Serial · -25 to +75°C Operation


Key Features

  • Wide temperature range - operates from -25 to +75°C for harsh environments
  • Multiple serial ports - 3x RS-232 and 1x RS-485 for legacy device support
  • Auto-negotiating Ethernet - 10/100 Base-TX with auto MDI/MDI-X wiring
  • Built-in watchdog timer - keeps the unit running reliably unattended
  • Onboard memory - 16KB EEPROM and 512KB Flash for firmware and data


Typical Applications

The device server fits well into industrial networks where serial equipment needs Ethernet connectivity.

  • Industrial automation networks
  • Factory floor serial-to-Ethernet gateways
  • Remote monitoring and control systems
  • Integration of legacy RS-232/RS-485 devices


A reliable choice for bridging serial devices and Ethernet networks in demanding industrial environments.