Item number SERIA-DEVIC-SERVE-ETHER

Serial Device Server with Ethernet, RS-232/485 and DI/DO

CPU 80186-80MHz compatible
10/100 Base-TX Ethernet RJ-45
3x Serial: RS-232, RS-485, RS-422
Baud rate up to 115200bps
4x Dry Contact Digital Input
4x Open Collector Digital Output
Watchdog Timer
Metal casing, wall mount
-25 to 75C (special components required)
+10-30VDC power input
102 x 29 x 125 mm

380.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 1 x 5-wire RS-2321 x RS-4851 x RS-485/RS-42210/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.7 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 10 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices to Ethernet networks while providing built-in digital input and output channels. It is designed for industrial automation tasks where legacy RS-232/RS-485 equipment must be integrated into modern network infrastructure.


10/100 Base-TX Ethernet · RS-232/RS-485/422 Serial · 4x DI / 4x DO · -25 to 75°C Operation


Built for Reliable Industrial Communication

  • Multi-protocol Serial - supports RS-232, RS-485 and RS-485/422 on separate ports
  • Digital I/O - 4 dry contact inputs and 4 open collector outputs for direct control
  • Wide Temperature Range - operates from -25 to 75°C for harsh environments
  • Watchdog Timer - ensures automatic recovery from unexpected system faults
  • Metal Enclosure - durable wall-mount casing suited for industrial cabinets


Typical Applications

The device server fits environments where serial equipment needs remote monitoring or control over an Ethernet network.

  • Factory automation and machine monitoring
  • Remote control of relays and sensors
  • Integration of legacy serial devices
  • Building and infrastructure monitoring systems


A robust choice for connecting serial equipment and I/O signals to Ethernet in demanding industrial settings.