Item number PROGR-DEVIC-SERVE-RS-4

Programmable Device Server, RS-232/422/485, 4 DI/4 DO, 10/100 Ethernet

80186-80MHz CPU or compatible
10/100 Base-TX Ethernet RJ-45
1x RS-232, 1x RS-485, 1x RS-485/422
Baud rate up to 115200 bps
4x Digital Input, Dry Contact
4x Digital Output, Open Collector
Watchdog Timer
Node address up to 254
DIN-Rail or Wall mounting
-25 to +75C operating temp
+10-30VDC power input
72 x 35 x 123 mm

349.74 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-4851 x RS-485/RS-422
Consumption 2.7 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 10 KΩ
Node Address 254 (max.)

Programmable Device Server

The Programmable Device Server connects serial devices to Ethernet networks, enabling reliable data exchange between older RS-232/RS-485/RS-422 equipment and modern IP-based systems. It is designed for industrial automation environments that require robust I/O handling and remote monitoring.


10/100 Base-TX Ethernet · RS-232/485/422 Serial Ports · 4x DI / 4x DO · -25 to +75°C Operating Range


Key Features and Benefits

  • Multi-protocol Serial Support - combines RS-232, RS-485 and RS-485/422 for flexible device integration
  • Built-in Digital I/O - 4 dry contact inputs and 4 open collector outputs for direct control tasks
  • Wide Operating Temperature - operates reliably from -25°C to +75°C in harsh environments
  • Flexible Mounting - supports both DIN-rail and wall mounting for easy installation
  • Watchdog Timer - ensures automatic recovery in case of system faults


Typical Applications

The device server is well suited for industrial control and monitoring tasks where serial equipment needs to communicate over an Ethernet network.

  • Factory automation networks
  • Remote monitoring of serial sensors
  • Building management systems
  • Integration of legacy RS-232/485 devices


A reliable choice for bridging serial devices and Ethernet networks in demanding industrial settings.