Item number PROGR-DEVIC-SERVE-RS-3

Programmable Device Server with RS-232/422/485 & I/O

80186-80MHz compatible CPU
4x Dry Contact Digital Input
4x Open Collector Digital Output
RS-232/422/485 serial port
10/100 Base-TX Ethernet RJ-45
115200 bps max baud rate
Watchdog Timer
DIN-Rail or Wall mounting
10-30VDC power input
-25/+75C (special components required)
Dimensions: 72x35x123mm

336.34 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-4851 x RS-485/RS-422
Consumption 2.0 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 10 KΩ
Node Address 254 (max.)

Programmable Device Server

The Programmable Device Server connects serial devices to Ethernet networks, providing reliable data acquisition and control in industrial environments. It combines serial communication with digital I/O for direct monitoring and control of connected equipment.


RS-232/422/485 · 4x Digital Input · 4x Digital Output · 10/100 Base-TX Ethernet


Key Features

  • Multi-protocol Serial Port - supports RS-232, RS-422 and RS-485 for flexible device connectivity
  • Digital I/O - 4 dry contact inputs and 4 open collector outputs for control and monitoring
  • Watchdog Timer - ensures automatic recovery in case of system failure
  • Wide Operating Temperature - operates reliably from -25 to +75C
  • Flexible Installation - DIN-rail or wall mounting for easy integration


Typical Applications

The device server is suitable for industrial automation and remote monitoring where serial equipment needs network connectivity.

  • Factory automation
  • Remote equipment monitoring
  • Building management systems
  • Process control


A robust and versatile solution for connecting serial devices to Ethernet networks in demanding industrial environments.