Item number PROGR-DEVIC-SERVE-ETHER-2

Programmable Device Server with Ethernet, RS-232/485 and DIO

Ethernet 10/100 RJ-45 port
2x RS-232, 1x RS-485 serial
4x Dry Contact Digital Input
4x Open Collector Digital Output
Watchdog Timer
Metal casing, wall mounting
-25-75C (special components required)
10-30VDC power input
102 x 29 x 125 mm (W x L x H)

380.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)2 x 5-wire RS-2321 x RS-485
Consumption 2.7 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices to Ethernet networks while providing built-in digital I/O for local control tasks. It is designed for continuous operation in demanding industrial environments and combines serial communication, network connectivity and I/O control in a single compact unit.


2x RS-232 / 1x RS-485 · 4 DI / 4 DO · -25 to 75°C · 10-30VDC


Reliable communication and control features

  • Dual serial interfaces - 2x RS-232 and 1x RS-485 for flexible device connections
  • 10/100 Ethernet port - auto-negotiating with auto MDI/MDI-X for easy network integration
  • Digital I/O onboard - 4 dry contact inputs and 4 open collector outputs for local automation
  • Watchdog timer - ensures automatic recovery from software faults
  • Rugged metal casing - built for wall mounting in industrial settings


Typical use cases in industrial networks

The device server suits applications where serial equipment needs to be integrated into an Ethernet-based control system, with the added benefit of local digital I/O.

  • Remote monitoring of serial instruments
  • Factory automation and machine control
  • Building and facility management systems
  • SCADA and remote data acquisition


A robust and versatile solution for bridging serial devices, digital I/O and Ethernet networks in industrial applications.