Item number PROGR-DEVIC-SERVE-DI-2

Programmable Device Server with 4-DI 4-DO, 2x RS-232/485, Ethernet

CPU: 80186-80 MHz compatible
4 x Dry Contact Digital Input
4 x Open Collector Digital Output
10/100 Base-TX Ethernet RJ-45
2 x RS-232, 1 x RS-485 Serial
115200 bps Max Baud Rate
512 KB Flash, 512 KB SRAM
16 KB EEPROM, Watchdog Timer
Metal Casing, Wall Mounting
+10~30VDC via Terminal Block
102 x 29 x 125 mm (WxLxH)
-25~75°C (special components required)

367.16 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 2 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.0 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices and digital I/O signals to an Ethernet network, enabling remote monitoring and control of industrial equipment. It is built for continuous operation in demanding environments and combines serial communication, digital inputs and outputs in a single compact unit.


4 Digital Inputs · 4 Digital Outputs · 2x RS-232/485 · 10/100 Ethernet


Key Features

  • Digital I/O - 4 dry contact inputs and 4 open collector outputs for direct control of external devices
  • Dual Serial Ports - 2x RS-232 and 1x RS-485 for connecting legacy serial equipment
  • Ethernet Connectivity - 10/100 Base-TX port with auto-negotiation and auto MDI/MDI-X
  • Rugged Design - metal casing rated for -25 to +75 C operation (special components required)
  • Reliable Memory - 512 KB flash, 512 KB SRAM and 16 KB EEPROM with watchdog timer for stable long-term operation


Typical Applications

The device server is suitable for industrial automation environments where serial equipment must be integrated into an Ethernet network.

  • Factory automation and process control
  • Remote monitoring of sensors and actuators
  • Building and facility management systems
  • Integration of legacy RS-232/485 devices into IP networks


A robust and flexible choice for bridging serial and digital I/O devices to Ethernet networks.