Item number PROGR-DEVIC-SERVE-10

Programmable Device Server with 10/100 Ethernet, 2x RS-232, RS-485, 4DI/4DO

CPU: 80186-80 MHz compatible
512KB Flash, 512KB SRAM, 16KB EEPROM
4x Digital Input (Dry Contact)
4x Digital Output (Open Collector)
10/100 Base-TX Ethernet RJ-45
2x RS-232, 1x RS-485 ports
Baud rate up to 115200 bps
Watchdog Timer
DIN-Rail or Wall mounting
10-30VDC power supply
72 x 35 x 123 mm (WxLxH)
-25~75°C (special req. components)

349.74 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)2 x 5-wire RS-2321 x RS-485
Consumption 2.7 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices such as sensors, PLCs and meters to Ethernet networks, while providing built-in digital inputs and outputs for local control and monitoring. It is designed for industrial automation environments requiring rugged, DIN-rail mountable connectivity.


10/100 Ethernet · 2x RS-232 + 1x RS-485 · 4 DI / 4 DO · -25 to +75°C


Key Features

  • Dual Serial Interfaces - supports RS-232 and RS-485 devices simultaneously
  • Digital I/O Onboard - 4 dry contact inputs and 4 open collector outputs for direct control
  • Wide Operating Temperature - rated from -25°C to +75°C for harsh environments
  • Watchdog Timer - ensures automatic recovery from system faults
  • Flexible Mounting - DIN-rail or wall mounting options for easy installation


Typical Applications

The device server is well suited for connecting legacy serial equipment to modern Ethernet-based control systems.

  • Factory automation and machine monitoring
  • Remote I/O control in industrial plants
  • Building automation and environmental monitoring
  • Serial-to-Ethernet gateway for PLCs and sensors


A reliable choice for bridging serial devices to Ethernet networks with integrated I/O control.