Item number PROGR-DEVIC-SERVE-6X

Programmable Device Server with 6x DI, 7x DO, RS-232/485 & Ethernet

80186-80MHz CPU or compatible
6x Digital Input (Wet Contact)
7x Digital Output (Open Collector)
10/100 Base-TX Ethernet RJ-45
RS-232/RS-485 port, 115200bps
Bias resistor 1k Ohm
Node address up to 254
Watchdog timer
Metal casing, wall mount
10-30VDC power input, 2.0W
-25~75°C (special components required)
102 x 29 x 125 mm

253.26 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB); 100,000 erase/write cycles
Installation Wall mounting
Type Wet ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-485
Consumption 2.0 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 67
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Casing Metal
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

The Programmable Device Server connects RS-232/RS-485 serial devices to Ethernet networks while providing built-in digital input and output channels. It is designed for industrial automation tasks that require reliable data conversion and I/O control in one compact unit.


6x Digital Input · 7x Digital Output · RS-232/RS-485 · 10/100 Ethernet


Built for Reliable Industrial Communication

  • Serial to Ethernet - converts RS-232/RS-485 signals to TCP/IP
  • Digital I/O - 6 wet contact inputs and 7 open collector outputs
  • Wide operating range - functions from -25 to +75°C
  • Watchdog timer - ensures stable long-term operation
  • Metal enclosure - durable housing for wall mounting


Typical Applications

The device server suits industrial environments where remote monitoring and serial communication must be combined with digital control.

  • Factory automation and machine monitoring
  • Remote I/O control over Ethernet
  • Legacy serial device integration
  • Outdoor or unconditioned installation sites


A robust solution for bridging serial devices and digital I/O with modern Ethernet networks.