Item number PROGR-DEVIC-SERVE-ETHER

Programmable Device Server with Ethernet, 6 DI, 7 DO, RS-232/485

10/100 Base-TX Ethernet Port
6 x Digital Input, Wet Contact
7 x Digital Output, Open Collector
1 x RS-232, 1 x RS-485 Serial
Baud Rate up to 115200 bps
CPU 80186-80MHz or Compatible
Watchdog Timer
Node Address up to 254 Max
DIN-Rail or Wall Mounting
-25°C to +75°C Operating Temp
10 - 30VDC Power Supply
72 x 35 x 123 mm (WxLxH)

222.44 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB); 100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Wet ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-485
Consumption 2.0 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 67
Powered from Terminal Block +10 ~ 30 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects serial devices and digital I/O signals to an Ethernet network, enabling remote monitoring and control in industrial environments. It combines a compact form factor with robust connectivity for demanding automation tasks.


10/100 Base-TX Ethernet · 6 x Digital Input · 7 x Digital Output · RS-232/RS-485


Key Features and Benefits

  • Ethernet Connectivity - integrates devices directly into the network
  • Digital I/O - 6 wet contact inputs and 7 open collector outputs for monitoring and control
  • Dual Serial Ports - RS-232 and RS-485 for flexible device connections
  • Watchdog Timer - ensures reliable operation without manual reset
  • Wide Temperature Range - operates reliably from -25°C to +75°C


Typical Applications

The device server is well suited for industrial automation and remote monitoring where serial and digital signals must be brought onto an Ethernet network.

  • Industrial automation and control
  • Remote monitoring and SCADA systems
  • Building automation
  • PLC and sensor integration


A reliable choice for connecting serial and digital I/O devices to Ethernet networks in industrial settings.