Item number MODBU-TCP-SERIA-DEVIC

Modbus TCP Serial Device Server with PoE, 2x RS-232/RS-485

Modbus TCP/IP serial device gateway
2 x RS-232, 2 x RS-485 ports
10/100 Base-TX Ethernet RJ-45
PoE IEEE 802.3af, Class 1
CPU: 80186-80MHz compatible
512KB Flash, 512KB SRAM
Baud rate up to 115200 bps
Max. 254 node addresses
Built-in watchdog timer
12-48VDC or PoE powered
88 x 82 x 149 mm

556.10 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting (DIN-Rail mounting for /DIN versions)
Operating Temperature -10 °C ~ +60 °C
Watchdog Timer Yes
Status 1 x Power1 x PoE2 x Ethernet8 x Communication
Ports 2 x 5-wire RS-2322 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, Auto MDI/MDI-X, LED indicators), PoE (IEEE 802.3af, Class 1)
Consumption 2.2 W
Dimensions (mm) 88 mm x 82 mm x 149 mm (W x L x H)
Storage Temperature -10 °C ~ +60 °C
Humidity 100% RH for operating temperature -10 °C ~ +60 °C
Reverse Polarity Protection Yes
Powered from Terminal Block +12 ~ 48 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM4
Stop Bit 1, 2: for COM1 ~ COM4
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Modbus TCP Serial Device Server

This Modbus TCP serial device server converts Ethernet based Modbus TCP/IP communication into serial RS-232 and RS-485 signals. It is designed for industrial automation systems that need to connect legacy serial devices to a modern Ethernet network. The unit supports PoE for simplified installation in field cabinets.


2 x RS-232 · 2 x RS-485 · PoE IEEE 802.3af · 10/100 Base-TX Ethernet


Key features and benefits

  • Modbus TCP/IP support - integrates serial devices into Ethernet networks
  • PoE powered - reduces cabling by combining power and data
  • Dual RS-232/RS-485 ports - connects multiple serial devices simultaneously
  • Watchdog timer - ensures reliable, unattended operation
  • Wide power input range - accepts 12-48VDC or PoE for flexible installation


Typical applications

The device server suits industrial environments where serial equipment must communicate over an Ethernet based Modbus network.

  • Factory automation networks
  • Building management systems
  • Remote monitoring of serial sensors
  • Integration of legacy PLCs with Ethernet SCADA systems


A reliable choice for bridging serial devices into modern Ethernet based Modbus TCP networks.