Item number PORT-RS-232-485

6-Port RS-232/485 Serial Device Server with PoE and Digital I/O

6 Serial Ports: RS-232/RS-485
1 x 10/100 Ethernet RJ-45
1 x Digital Input, Dry Contact
2 x Digital Output, Open Collector
PoE IEEE 802.3af Class 1
CPU: 80186-80 MHz compatible
512 KB Flash, 512 KB SRAM
Watchdog Timer
Metal Casing, Wall Mounting
12-48VDC (Terminal Block)
102 x 29 x 125 mm (W x L x H)
-25~75°C (special components required)

502.50 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE5 x digit 7 Segment
Ports 4 x 3-wire RS-2321 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.9 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 21
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM6
Stop Bit 1, 2: for COM1 ~ COM6
Casing Metal
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Serial Device Server

This industrial serial device server connects up to six RS-232 and RS-485 devices to an Ethernet network. It is designed for demanding automation environments where reliable serial-to-Ethernet communication and digital I/O monitoring are required.


6 Serial Ports · PoE Powered · Digital I/O · -25 to 75°C


Key Features

  • 6 Serial Ports - supports RS-232 and RS-485 devices simultaneously
  • PoE Powered - a single Ethernet cable delivers both data and power
  • Digital I/O - 1 dry contact input and 2 open collector outputs for monitoring and control
  • Watchdog Timer - automatic recovery ensures continuous operation
  • Metal Housing - rugged casing rated for wide operating temperatures


Typical Applications

The device server is well suited for industrial environments where serial equipment must be integrated into a modern Ethernet network.

  • Factory automation and PLC integration
  • Building and facility monitoring systems
  • Remote equipment access over Ethernet
  • Outdoor or unheated installation sites


A reliable choice for connecting serial devices to Ethernet in harsh industrial environments.