Item number POE-SERIA-DEVIC-SERVE

PoE Serial Device Server, 1x RS-232, 4x RS-485, DIN-Rail

10/100 Base-TX RJ-45 Ethernet port
1 x RS-232, 4 x RS-485 serial ports
Auto MDI/MDI-X, LED indicator
Baud rate up to 115200 bps
Node address up to 254
Watchdog timer
16KB EEPROM, 512KB Flash, 512KB SRAM
DIN-Rail or wall mounting
IEEE 802.3af PoE Class 1
+12~48VDC terminal block power
-25~75°C (special components required)
72 x 35 x 123 mm (W x L x H)

447.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE5 x digit 7 Segment
Ports 1 x 5-wire RS-2324 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.9 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +12 ~ 48 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM5
Stop Bit 1, 2: for COM1 ~ COM5
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Serial Device Server

This serial device server converts Ethernet to RS-232 and RS-485 signals, allowing industrial serial devices to communicate over a standard network. It is designed for PoE-powered installation in demanding automation and control environments, with a wide operating temperature range for continuous industrial use.


10/100 Base-TX Ethernet · 1x RS-232 / 4x RS-485 · IEEE 802.3af PoE · -25 to 75°C


Built for reliable industrial communication

  • Multiple serial ports - connect one RS-232 and up to four RS-485 devices simultaneously
  • PoE powered - reduces cabling by supplying power and data over one Ethernet cable
  • Watchdog timer - automatically resets the unit if it stops responding, improving uptime
  • Wide operating range - operates reliably from -25°C to +75°C in harsh environments
  • DIN-rail or wall mounting - flexible installation in control cabinets or on walls


Typical applications

The device server is well suited for connecting legacy serial equipment to modern Ethernet networks in industrial settings.

  • Factory automation and process control
  • Building management and remote monitoring
  • Connecting PLCs and sensors via RS-485
  • Retrofit of serial equipment onto Ethernet


A robust and flexible solution for bridging serial devices to industrial Ethernet networks.