Item number ETHER-MODUL-POE-4X-6

Ethernet I/O Module with PoE, 4x DI/4x DO, RS-232/485 Serial

Ethernet I/O module with PoE support
4 x Digital Input (Dry Contact)
4 x Digital Output (Open Collector)
10/100 Base-TX RJ-45 Ethernet port
2 x RS-232, 1 x RS-485 serial ports
Baud rate up to 115200 bps
Watchdog timer included
-25~+75°C (special components required)
PoE 802.3af Class 1 / 12-48VDC
Dimensions: 72 x 35 x 123 mm

402.00 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)2 x 3-wire RS-2321 x 5-wire RS-2321 x RS-485
Consumption 2.9 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM4
Stop Bit 1, 2: for COM1 ~ COM4
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital input/output channels with serial communication ports in a single DIN-rail mountable unit. It is designed for remote monitoring and control of industrial equipment over standard Ethernet networks, and can be powered directly via PoE or a terminal block.


4 x Digital Input · 4 x Digital Output · PoE (802.3af) / 12-48VDC · -25 to +75°C


Key Features and Functions

  • Dry contact inputs - 4 digital inputs for sensors and switches
  • Open collector outputs - 4 digital outputs for relays and actuators
  • Serial connectivity - 2 x RS-232 and 1 x RS-485 ports for legacy devices
  • Power over Ethernet - single cable for data and power supply
  • Wide temperature range - reliable operation from -25 to +75°C


Typical Applications

The module fits well into industrial automation and remote monitoring setups where robust environmental performance is required.

  • Remote monitoring of sensors and switches
  • Control of pumps, valves and relays
  • Integration of legacy serial devices via Ethernet
  • Outdoor and harsh-environment installations


A robust and flexible I/O solution for industrial Ethernet networks.