Item number PORT-RS-232-RS

4-Port RS-232/RS-485 Serial Device Server with PoE, -25 to 75°C

CPU 80186-80MHz compatible
10/100Base-TX RJ-45 Ethernet PoE
3 x RS-232 (5-wire/9-wire)
1 x RS-485 port
Baud rate up to 115200 bps
Built-in 1 kOhm bias resistor
Watchdog timer
Metal casing, wall mount
PoE IEEE 802.3af Class 1
-25/+75°C (special components required)
12-48VDC (Terminal Block)
102 x 29 x 125 mm

418.08 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE
Ports 2 x 5-wire RS-2321 x 9-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.2 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +12 ~ 48 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM4
Stop Bit 1, 2: for COM1 ~ COM4
Casing Metal
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Serial Device Server

This serial device server converts RS-232 and RS-485 serial signals into Ethernet, allowing legacy industrial equipment to be integrated into modern network infrastructure. It is built for continuous operation in harsh industrial environments and can be powered directly via PoE.


3 x RS-232 · 1 x RS-485 · PoE IEEE 802.3af · -25 to +75°C


Robust Design for Industrial Networks

  • PoE Power Supply - eliminates the need for a separate power adapter
  • Wide Operating Temperature - runs reliably from -25°C to +75°C
  • Metal Enclosure - protects electronics in demanding environments
  • Watchdog Timer - automatically restarts the device after a fault
  • Multiple Serial Interfaces - supports RS-232 and RS-485 devices simultaneously


Typical Applications

The device server is suitable wherever serial equipment needs to communicate over an Ethernet network.

  • Factory automation systems
  • Building management systems
  • Remote monitoring of industrial sensors
  • Integration of legacy serial devices


A reliable bridge between serial equipment and modern Ethernet networks.