Item number ETHER-MODUL-POE-4X-3

Ethernet I/O Module PoE, 4x Dry Contact Input, 4x Open Collector Output, RS-485

Ethernet I/O module with PoE
10/100 Base-TX RJ-45 port
4 x Digital Input (Dry Contact)
4 x Open Collector Output
RS-232 and RS-485/RS-422 ports
IEEE 802.3af PoE Class 1
DIN-Rail or wall mounting
254 max node address
12-48VDC or PoE powered
72 x 35 x 123 mm
-25~+75C (special components required)

395.30 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-4851 x RS-485/RS-422
Consumption 2.9 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 10 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital inputs, open collector outputs and serial interfaces in a single DIN-rail unit. It is designed for remote monitoring and control of dry contact signals and low-voltage loads over a standard Ethernet network. The module can be powered directly via PoE, simplifying cabling in industrial installations.


4x Digital Input · 4x Open Collector Output · RS-232/RS-485 · IEEE 802.3af PoE


Key Features and Functions

  • PoE Powered - eliminates the need for a separate power supply
  • Dry Contact Inputs - monitor switches, sensors and relay contacts
  • Open Collector Outputs - drive relays, indicators and low-power loads
  • Dual Serial Interfaces - RS-232 and RS-485/RS-422 for legacy devices
  • Wide Temperature Range - operates reliably from -25C to +75C


Typical Applications

The module fits well into industrial automation and remote monitoring systems where robust I/O over Ethernet is required.

  • Factory automation
  • Building and facility monitoring
  • Remote equipment control
  • SCADA and process monitoring


A reliable, PoE powered I/O solution for demanding industrial environments.