Item number POE-ETHER-MODUL-4X

PoE Ethernet I/O Module with 4x DI, 4x DO, RS-232/422/485

10/100 Base-TX Ethernet RJ-45
4 x Digital Input (Dry Contact)
4 x Digital Output (Open Collector)
1 x RS-232, 1 x RS-485, 1 x RS-422/485
PoE IEEE 802.3af Class 1
Watchdog Timer
80186-80MHz CPU or compatible
512KB Flash, 512KB SRAM, 16KB EEPROM
12-48VDC or PoE Power Input
72 x 35 x 123 mm (WxLxH)
-25/+75C (special components required)

380.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE
Ports 1 x 5-wire RS-2321 x RS-4851 x RS-485/RS-42210/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.2 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 10 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital input/output channels with serial communication ports in a single PoE-powered DIN-rail unit. It is designed for remote monitoring and control tasks in industrial automation systems, where reliable data acquisition over Ethernet is required.


4 x Digital Input · 4 x Digital Output · RS-232/RS-485/RS-422 · PoE IEEE 802.3af


Built for Reliable Industrial I/O

  • Digital Inputs - 4 dry contact channels for monitoring switches and sensors
  • Digital Outputs - 4 open collector channels for driving relays and indicators
  • Serial Ports - RS-232 and RS-485/RS-422 for connecting legacy devices
  • PoE Power - powered directly via the Ethernet cable, simplifying installation
  • Wide Temperature Range - operates reliably from -25°C to +75°C


Typical Applications

The module fits well into distributed automation and monitoring networks where compact, rugged I/O is needed close to the process.

  • Factory automation monitoring
  • Remote equipment status monitoring
  • Building and infrastructure control
  • Integration of legacy serial devices into Ethernet networks


A robust and flexible choice for industrial Ethernet I/O and serial device integration.