Item number POE-ETHER-MODUL-DIGIT

PoE Ethernet I/O Module, 6 x Digital Input, 7 x Open Collector Output

Ethernet I/O module with PoE support
6 x Digital Input (Wet Contact)
7 x Open Collector Output (NPN)
10/100Base-TX RJ-45 Ethernet port
RS-232 and RS-485 serial ports
Baud rate up to 115200 bps
IEEE 802.3af PoE Class 1
Metal casing, wall mounting
-25/75C (special components required)
12-48VDC terminal block power
102 x 29 x 125 mm

302.84 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB); 100,000 erase/write cycles
Installation Wall mounting
Type Open CollectorWet Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE
Ports 1 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.2 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 76
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Casing Metal
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital inputs and outputs with serial communication in a single PoE-powered device. It is designed for industrial control, monitoring and automation tasks where reliable data acquisition and remote switching are required.


6 x Digital Input · 7 x Open Collector Output · PoE IEEE 802.3af · RS-232/RS-485


Key Features and Benefits

  • PoE Powered - runs on a single Ethernet cable, no extra power supply needed
  • Wet Contact Inputs - flexible connection to a wide range of sensors
  • Open Collector Outputs - direct switching of relays, valves and indicators
  • Dual Serial Interfaces - RS-232 and RS-485 for connecting legacy equipment
  • Wide Temperature Range - operates reliably from -25C to +75C


Where It Fits

The module is well suited for distributed control systems where digital signals must be gathered and acted on remotely over Ethernet.

  • Industrial process monitoring
  • Remote equipment control
  • Building automation systems
  • Field data acquisition


A robust, PoE-powered I/O solution built for demanding industrial environments.