There are 181 products.
ICP DAS I-7083 Module with 3 axis encoder module, quadrant count CW, CCW. 32 bits count. 1 MHz.

RS485 module with 3-axpet Encoder input
1MHz Frequency input
input voltage: Up to 5VDC
Other voltages are with external resistance
32 bit counter
Quadrant, Pulse / Dir, CW and CCW
RS485 port - 1200 - 115.2K Baud
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm

275.24 €
Item numberM485-COUNT-Q-I
On the way in
Ethernet module with 2 contact inputs, 1 relay output, with P2P function. I / O mirroring. PoE.

Ethernet module with 2 digital inputs and 1 relay output
2 x digital dry contact - active high by connecting contact
1 x Power relay, 250vac / 5a, 30vdc / 5a
Avoid inductive load to relay
P2P Function that reflects an input to other module output
Supports Modbus / TCP and UDP Slave
Power supplied from PoE or 12 - 48VDC
PoE: IEEE802.3af, Class 1
Operating temperature: - 25 - + 75 ° C
Dim: 98 x 52 x 27 mm
DIN bracket

151.82 €
Item numberETH-MOD2I1R-P-I
Physically in stock
USB-COUNT (ICP DAS USB-2084) is a module with 8-channel frequency counter, max. 500kHz via USB. Pulse count up/down or phase A/B

Versatile frequency counter, pulse counter via the USB port
Powered from the USB port
A total of 8 entries, of which:
4 channels for UP/DOWN, DIR/PULSE, Phase AB
8 channels for Count-Up and frequency counter
32 bit resolution
Max. 500kHz (non-isolated)
Input voltage: 0 - +30V
USB 2.0
YOUR assembly
Dimensions: 107 x 102 x 33 mm
Operating temperature: -25 - + 75°C

228.60 €
Item numberUSB-COUNT
On the way in
Protection lid to DIO-XX radio modules

Accessories
Protective cover
for DIO-RXX and DIO-TXX

34.97 €
Item numberDIO-KAB
Physically in stock
725-TRX8-1K is a 2-channel radio module, transmitter and receiver for the transmission of digital signals

868MHz Transceiver with 2 x Dry input, 2 x Relay
2 relay outputs, 250VAC/5A, 12V/10A
2 contact inputs, end contact so-called dry contact
Up to 1000 meters in range with gain antenna
Rubber antenna included
Watchdog function
Supply voltage: 12 - 32VDC

469.67 €
Item numberDIO-TR725
On the way in
ICP DAS I-7016 Module with 2 x analog input for strain gauge 4-wire, 1 x excitation OUT 0 - + 10VDC, 1 x DI and 4 x Do, RS485

RS485 module with 2-channel strain gauge gauge
high resolution: 16-bit
excitation voltage range: 0 ~ +10 V.
50 Hz Event counter (digital input)
high / low alarm (Digital Output)
Linear Map Function
3000 VDC Intra Module Isolation
Double Watchdog
Temperature Area: -25 to + 75 ° C
Supply Voltage: 10 - 30vdc
Dim: 123 x 76 x 35 mm

356.17 €
Item numberM485-AD16DA12-I
Physically in stock
ICP DAS I-7017Z-G Module for measuring 10 to 20 analogs 4 - 20mA streams or voltages

20 channel analog input module for RS485 Bus
16bit resolution
20 Single Ended inputs (common frame) - Only for Volt
10 differential entrances for volts about power
10 measurements per second (Total )
Jumper Setting in the module
Supply voltage: 10 - 30vdc / 1.3 watts
Dim: 123 x 72 x 35 mm
DIN bracket

336.61 €
Item numberM485-AD16U20-I
On the way in
8 x analoge indgange, maks. +/-10 volt, 16bit, RS 485forVia RS485 bus

8 channel analog input module for RS485 Bus
16bit resolution
10 measurements per second (total)
for current measurement - shunt with 125 ohm resistance
Supply voltage: 10 - 30vdc / 1.3 watt
Dim: 123 x 72 x 35 mm
with your bracket

268.27 €
Item numberM485-AD16U8-I
On the way in
16 x voltage measurement +/- 200mV to +/- 10 volts, 16 bit. 250kHz

16 analog inputs with common ground
or 8 differencial inputs.
Up to +/- 10 Volt, 250kHz
16 Bit resolution
Software Support: LabVIEW, Matlab
Software Support : C / C++, Visual Basic, Visual Studio.net
Power from the USB port

1,297.66 €
Item numberUSB-AD16S16A
On the way in
Environmental monitoring station to the premises for the measurement of CO CO2, temperature, humidity. APP

CO2 - CO - temperature - humidity
measurement of carbon monoxide and carbon dioxide
alarm device at high concentration
color LCD display with touch
CO 9-1000 ppm
CO2 0-9999 ppm
Electrochemical sensors (NDIR CO2 sensor)
temperature of -10 - + 50 ° C, humidity 0 to 100% RH
Up to 450,000 logs with date and timestamps
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 2-wire / Ethernet RJ45
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 114 x 106 x 56 mm
DIN or wall mounting bracket

812.31 €
Item numberET-AIRCOCO2TH-I
Physically in stock
HMI 4.3" Controller Panel with Touch, Network, RS485, RS232

HMI Panel with LCD Display, Ethernet and Com Ports
Can be connected to most of the manufacturer's I / O modules
Power supplied from PoE or 12 - 48VDC / 2.5 Watt
RS-485 (with self-tunes) < Br> RS-232 (RX / TX / GND)
RTC - Real-time tour
GUI design
Free HmiWorks development tools
supports C and Ladder designer
design suggestions from manufacturer
Modbus TCP / RTU protocol
Dim: 140 x 87 x 41 mm

340.36 €
Item numberHMI4.3"SER-IC
Physically in stock
4.3” Touch HMI Device with RS-232 (3-pin), RS-485, USB, RTC, Ethernet

High resolution Color Touch screen
Poe (power over Ethernet)
RS232 Port, RS485 Bus
USB Download Port
RTC (Real Time Clock)
Gui Design
Free HmiWorks Development Tool
Supports C language and ladder designer
Modbus / TCP, Modbus / RTU and DCON protocol
Size: 126 x 92 x 29 mm
Operating temperature: -20 ~ 50 ° C
supports custom third-party protocol (C-language)

393.56 €
Item numberHMI4.3"SER-ETH
On the way in
HMI 4.3" Controller Panel with Touch. 2 x RS485 Bus, Modbus RTU, C, Ladder

HMI control with 4.3 "TFT Touch
IP40
interface: 2 x RS485
USB port for download
RTC - Real Time Clock
Free HmiWorks Development software
Supply voltage: 12 - 48VDC
Temperature: -30 - + 50 ° C
Goal: 140 x 87 x 41 mm
Less-Surface-Exposed Housing Design Design

316.24 €
Item numberHMI4.3"SER2-I
On the way in
HMI 2.8" Controller panel with touch screen - OUTLET

Til mindre styringsopgaver, med TFT display og touch

204.62 €
Item numberHMI2.8"ETH-I
Physically in stock
HMI 2.8" Controller Panel with Touch, RS485. Modbus RTU

2.8" HMI control panel for I / O modules
can be connected to many RS485 modules from the manufacturer
with TFT display and touch
RS485 Bus, Modbus RTU protocol
USB port for programming
Free HmiWorks Development Software
RTC Real Time Clock
Supply Voltage: 12 - 48VDC
Dim: 119 x 76 x 33 mm

240.26 €
Item numberHMI2.8"RS485
On the way in
HMI 2.8" Controller Panel with Touch. Modbus/TCP

2.8" Touch HMI device with Ethernet and PoE
High Resolution color touchscreen
RTC (Real Time Clock)
GUI design
Modbus TCP/RTU protocol
ESD protection: 4 kV
Operating temperature: -20 ° C ~ 70

291.85 €
Item numberHMI2.8"ETH-I+
On the way in
Humidity meter (Hygrometer) with alarm function - DANBIT

Humidity meter

Humidity / temperature data logger
Long-term monitoring of rooms
With alarm function and interface
Numeric and graphic display

670.27 €
Item numberLOG-RH520A
On the way in
Showing 101-120 of 181 item(s)