Via USB

Via USB

Via USB
There are 6 products.
8 x relay via USB with Command line

Compact Open Board with 8 relay exits
250V / 10A Only resistive load
Controlled from USB
supply voltage: 5VDC
supply via DC Jack or terminal block
No cabinet

54.94 €
Item numberUSB-REL5V8
Physically in stock
USB controlled 8 Relay Output Module Final Lays (Plug & Play) to DIN Rail Mont wide Temperatur

8 final lecturer 250 VAC 5 A
USB type B with screw terminals
USB 2.0 Full-Speed ​​via USB port
Plug-and-Play
PWR / RUN / ERR LED lamps
For YOUR rail mounting
Operating temperature: -25 to + 75 °

146.73 €
Item numberUSB-REL8+
Physically in stock
4 x relay outputs 250VAC via USB

Compact open board with 4 relay outputs
250VAC / 30VDC / 10A resistive load only
Controlled from USB via HID (E.g. usb-relay-hid )
Supply voltage: 5VDC
Supply via DC jack or terminal block
No cabinet
Please note no software is included
Get info on USB-RELAY-HID software online.

40.87 €
Item numberUSB-REL5V4
Physically in stock
Relay module for USB 10A 250VAC with 4 Relay outputs

Compact open board with 4 relay outputs
250VAC / 30VDC / 10A resistive load only
Controlled from USB via HID (E.g. usb-relay-hid )
Supply voltage: 12VDC
Supply via DC jack or terminal block
No cabinet
Please note no software is included
Get info on USB-RELAY-HID software online.

33.90 €
Item numberUSB-REL12V4
Physically in stock
Relay output via USB 250VAC / 30VDC

Compact open board with 1 relay output
250VAC / 30VDC / 10A resistive load only
Controlled from USB via HID (E.g. usb-relay-hid )
Supply voltage: 5VDC via USB
No cabinet
Please note no software is included
Get info on USB-RELAY-HID software online.

32.43 €
Item numberUSB-REL5V1
Physically in stock
Relay Output Card 8-Channel 6A TTL Control

8 relay outputs

Relay switches up to 6A DC

Relay max voltage: 60V

Relay response time: 10ms

Relay life: 100000 cycles

One-way switches, 2-pin terminals

TTL output signals

Galvanic isolation of channels

8 LEDs for input/output state

Screw-clamp connections

25-pin D-Sub male connector

USB-PIO compatible

DIN rail mounting (ZU-EW optional)

Humidity: 0-90% non-condensing

CE: EN61000-6-1, EN61000-6-3

RoHS and WEEE compliant

Power: +5V DC, max 3.5W

0..70C operating temp

160mm x 100mm x 20mm


CAN BE USED WITH USB-DIO24

86.70 €
Item numberTERM25R8
Physically in stock
Showing 1-6 of 6 item(s)